Switch Puller Jackets

The Switch Pullers Jacket manufactured from GraLite® 20 has been designed to provide protection from arcing at manual or automatic switching gear. The garment has a one-piece, 43” long solid front so it must be pulled on over the head and has standard sleeves. A gusset with a concealed hook and loop closure has been added to the front neckline to give an extra-large opening. The back extending from the shoulders to the waist has been pleated in two places for ease of donning and doffing. The opening below the waist provides complete freedom of movement and ventilation. No metal is used in the garment. This jacket eliminates the need for a heavy, bulky coat that is uncomfortable for the worker to wear. Switch Puller Jackets are manufactured to order.

Get a Quote

Existing Designs

Choices include only the options in use on an existing design. Scroll down to see all available options.

Click on box in left column and then on the Compare Products at bottom of chart to view side-by-side comparison of selected products. Limit of 3 at one time.

		Description	Fabric	Units	Sizes	Length	Additional Garment Options
		072-6253-**** One-piece, 43” long solid front so it must be pulled on over the head and has standard sleeves. A gusset with a concealed hook and loop closure has been added to the front neckline to give an ex...	GraLite® 20	Each	All Sizes	X	X	View
		Description	Fabric	Units	Sizes	Length	Additional Garment Options

Any asterisk (*) shown in an Item No. will be replaced with a combination of digits identifying all of the options selected.

Available Options

Download Options Chart

Select attribute from list to see available options. Select option photo to enlarge.

SS - Sold SeparatelyAO - Option available at time of order

Length AO

43"

Length of garment from shoulder at neck to hem

Sleeves AO

Standard Sleeve

The standard sleeve cuff provides reliable, economical arm protection.

Additional Garment Options AO

Imprinted

See Imprinting Garments Category for more information on imprinting available

Addition of 1 or 2 pockets

1 or 2 pockets can be sealed onto many of our garments. Standard pockets come with drain holes in the bottom. Current pocket sizes offered are: 5" x 6" (no drain holes), 5" x 9", 7" x 7" and 10" x 10". The pocket will be manufactured from the same fabric as the garment. More Photos 3

+/- 3" increments to sleeve length

The design of our garments allows for non-binding movements such as reaching, bending, stooping, sitting, squatting etc. for the typical height and stature per size. For taller or shorter users we will customize the standard garment, sleeve or leg length plus or minus in 3" increments to allow a custom fit. Contact our Customer Service Department for more information.

Addition of a hang-up loop

A heavy duty ring attached to the garment for easy storage. This ring is NOT to be used as a rescue-ring.

Fabric

GraLite® 20

GraLite® 20 is recommended for more severe corrosive and abrasive conditions because of its 24 mils to 26 mils thickness. With a PVC coating on one side, GraLite® 20 has proven itself to be a rugged, durable protective fabric.