Bib Overalls

The comfortable, full-cut design of StaSafe® bib overalls offers lower body and leg protection. This rugged overall has a reinforcing bead sewn from the sides of the bib across the back to give additional strength and form; a unique feature found only in StaSafe® bib overalls. The straps are polypropylene webbing with chemically resistant plastic bayonet fasteners and sliders for convenience and proper fit. Bib Overalls are manufactured to order. The last four digits of the Item Number are based on the combination of options selected.

Available Options

Download Options Chart

Select attribute from list to see available options. Select option photo to enlarge.

SS - Sold SeparatelyAO - Option available at time of order

Alternate Strap

1 ½" Strap with Buckle Connector

The straps are 1 ½" black polypropylene webbing with 1 ½" chemically resistant black plastic bayonet-style buckle fastener and slides for convenience and proper fit.

1 ½" Strap with Hook & Loop

The straps are 1 ½" black polypropylene webbing with a 1 ½" wide hook & loop strip for convenience and fit.

Attached Footwear

Attached Molded Black PVC Boots

Molded PVC Boots are made of chemically resistant molded PVC with 3/16" thick soles for protection from corrosive chemicals that have been permanently attached/sealed to the end of the leg. These boots are designed to fit over shoes or light work boots. The seal is liquid and vapor tight.

PVC Stocking Foot Booties - Standard

PVC Stocking Foot Booties are molded and permanently attached to the leg cuff. This bootie is seamless, comfortable and shaped to fit smoothly into a work boot. A flap is permanently attached to the outer leg area and drapes over the top of the boot reducing the opportunity for splashes to enter the inside of the work boot. Boots must be worn over the booties.

CPE Stocking Foot Booties

CPE Stocking Foot Booties are permanently attached to the leg cuff. This bootie is comfortable and shaped to fit smoothly into a work boot. A flap is permanently attached to the outer leg area and drapes over the top of the boot reducing the opportunity for splashes to enter the inside of the work boot. Boots must be worn over the booties.

Alternate Legs

Double Leg Cuffs with Elastic Inner Cuff

An additional leg section has been sealed onto the calf of the leg and extends to the bottom of the leg to pull over the boot for drip protection. Elastic is added to the inner leg cuff to gather it close to the ankle and stirrups are attached to the inner leg section to hold the leg securely inside the boots.

Flared Leg Cuffs with Snaps

The leg section from the knee to the cuff is slightly flared and has snaps added. This allows for an easier donning over boots and the snugging the leg cuff to the boot with the snap closure.

Elastic Leg Cuffs

Elastic added to the leg cuff hem to keep the bib overall leg snug against the boot. The boot in the photo is sold separately.

More Photos 2

Reinforced Knees

The elbow, knee and seat regions are more at risk for cuts, tears and wear in some conditions. For added protection, an extra layer of fabric is sewn into the seams and sealed with the seams as well as on the top and bottom of the extra panel.

More Photos 2

Reinforced Crotch

An extra triangular patch of garment fabric is sewn and sealed in the crotch region for added strength.

Reinforced Seat

Additional Garment Options AO

Imprinted

See Imprinting Garments Category for more information on imprinting available

+/- 3" increments to leg length

The design of our garments allows for non-binding movements such as reaching, bending, stooping, sitting, squatting etc. for the typical height and stature per size. For taller or shorter users we will customize the standard garment, sleeve or leg length plus or minus in 3" increments to allow a custom fit. Contact our Customer Service Department for more information.

Addition of 1 or 2 pockets available

1 or 2 pockets can be sealed onto many of our garments. Standard pockets come with drain holes in the bottom. Current pocket sizes offered are: 5" x 6" (no drain holes), 5" x 9", 7" x 7" and 10" x 10". The pocket will be manufactured from the same fabric as the garment. More Photos 3

Nomex®-lined Pants

Click on Nomex®-lined Garments in the left menu to search for Nomex®-lined pants.

Fabric

HiGlo

HiGlo is a bright yellow, proprietary polyvinyl chloride compound that is coated on both sides. Our compound gives the fabric a softer, more pliant feel and superb low temperature flexibility. At 19 mils to 21 mils thick, HiGlo is the fabric of choice for maintenance and operations personnel within the chemical/petrochemical and HF Refining industries.

CPE

Chlorinated Polyethylene is easily recognized by its bright orange color so that it is readily identifiable in hazardous conditions. CPE is a 23 mil thick proprietary formulated fabric that provides outstanding chemical and flame resistance while maintaining flexibility in low temperatures. It also provides superior protection from inorganic acids, oxidizing acids and aliphatic hydro-carbons. CPE fabric meets and exceeds the Flame Impingement criteria set forth in ASTM F1358.

FlexLite Orange

FlexLite Orange is easily recognized by its bright neon orange color. At 19 mils to 21 mils thick, FlexLite Orange is similar to HiGlo except for its difference in color.

GraLite®

GraLite® is a pearl gray, proprietary polyvinyl chloride compound that is coated on both sides. The 19 mils to 21 mils thick material offers resistance to most aliphatic hydrocarbons, caustics, organic acids and alcohols.

FlexLite Blue

FlexLite Blue is easily recognized by its bright blue color. At 17 mils to 19 mils this fabric is designed to replace raingear in the chemical/petrochemical and HF Refining industries. FLB cost per wearing is an economical way to improve safety and reduce cost in hazardous environments.

FlexLite Green

FlexLite Green can be recognized by its mossy green color. At 17 mils to 19 mils this fabric is similar to FlexLite Blue except for the difference in color.

GraLite® 20

GraLite® 20 is recommended for more severe corrosive and abrasive conditions because of its 24 mils to 26 mils thickness. With a PVC coating on one side, GraLite® 20 has proven itself to be a rugged, durable protective fabric.

WinterGlo

WinterGlo is a bright pink and coated on both sides. WinterGlo is 19 mils to 21 mils thick and easily identified by its distinctive color and flexibility.

WinterGlo 20

WinterGlo® 20 is 24 mils to 26 mils thick and offers outstanding chemical resistance. WinterGlo 20 is easily identified by its one side coating and our proprietary PVC formulation keeps fabric soft and flexible year round.